It is the duty and desire of electricians to have all components functioning in the most optimal level. Malfunction is often caused by damages, poor installation work, corrosion or even contamination. The most common sign of a problem in the system is excessive heat resulting from poor conductivity. If left unchecked, the results can range from unnecessary and costly power disruption to very catastrophic events such as electrocution and fires. Initially, more costly and time consuming physical inspection was the only dependable way to keep the system safe but engineers are now migrating to electrical infrared inspection method which has proven not only cheaper but more effective.
Through this method of inspection, it is much easier to locate the underlying problem reducing downtime and equipment damage. It also come with additional benefits such as prevention of catastrophic failures well in advance, help establish repair priorities, improves preventive and maintenance efficiency and provides for testing under load hence avoiding costly shutdowns.
Excessive heat is normally an indication of the underlying problem that must be handled before a disaster. Other than mechanical damages to power lines and other electrical devices, there are several causes of overheating but the common ones include faulty assembly, loose connections, wear and tear, ground faults, contamination and corrosion. Most of these results from exposure to physical elements and thus calls for periodic inspection.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
This is the best way in terms of cost and time to inspect almost all electrical components. The most common components that need regular inspection include transformers, switchgear, bus ducts, power correcting banks, variable frequency drives, the disconnects, distribution centers and panels, sub-feed panels, the motor control centers, the uninterruptable power supplies, the lighting and the receptacle panels among several other components.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
Part of the decision to use this cutting edge infrared detection technology requires that the companies you choose for your inspection job are certified. They should have experienced engineers for the job with a proven work record. With the correct inspectors, you will be able to significantly reduce unscheduled power outages and increase energy efficiency, safety and dependability in general.
Through this method of inspection, it is much easier to locate the underlying problem reducing downtime and equipment damage. It also come with additional benefits such as prevention of catastrophic failures well in advance, help establish repair priorities, improves preventive and maintenance efficiency and provides for testing under load hence avoiding costly shutdowns.
Excessive heat is normally an indication of the underlying problem that must be handled before a disaster. Other than mechanical damages to power lines and other electrical devices, there are several causes of overheating but the common ones include faulty assembly, loose connections, wear and tear, ground faults, contamination and corrosion. Most of these results from exposure to physical elements and thus calls for periodic inspection.
The other benefit of this survey is that there is no need to shut down the system. It is a non-contact a nondestructive form of testing (NDT) that allows for work continuation without interrupting system production. The equipment get inspected under normal loads and the normal operating condition by scanning devices to reveal the existing and emerging problems before it is too late.
This is the best way in terms of cost and time to inspect almost all electrical components. The most common components that need regular inspection include transformers, switchgear, bus ducts, power correcting banks, variable frequency drives, the disconnects, distribution centers and panels, sub-feed panels, the motor control centers, the uninterruptable power supplies, the lighting and the receptacle panels among several other components.
Given that thousands of devices can be tested within hours, it has proven to be more convenient, highly effective and very efficient method of maintaining electrical system replacing the physical inspection. It is also endorsed by the National Fire Protection Association and the InterNational Electrical Testing Association among other bodies that now advocates for its use.
This form of testing and survey therefore saves engineers millions of dollars improving profitability and significantly decrease the expenses in the areas of operations, testing and maintenance in general. With this convenience and financial benefits, this is a technology you cannot afford to miss in this century if you think of remaining in business.
Part of the decision to use this cutting edge infrared detection technology requires that the companies you choose for your inspection job are certified. They should have experienced engineers for the job with a proven work record. With the correct inspectors, you will be able to significantly reduce unscheduled power outages and increase energy efficiency, safety and dependability in general.
About the Author:
You can visit www.infraredscanningservice.com for more helpful information about Using Electrical Infrared Inspection Is A Sure Way To Save Time And Money.
No comments:
Post a Comment